Feather Shield Standard
⚠️
Warning
This page is informational - the LCPF does NOT (yet) directly support any Feather compatible Shield or Controller boards.
The Feather shield standard is a ShieldStandard created by Adafruit . It has one 12 pin and one 16 pin header for a total of 28 pins.
| Pins | Usage | Notes | Pin Names | |
|---|---|---|---|---|
| 4 | Analog IO | A0, A1, A2, A3 | ||
| 2 | Analog or GPIO | A4, A5 / D24, D25 | ||
| 7 | GPIO | D5, D6, D9, D10, D11, D12, D13 | ||
| 2 | UART or GPIO | RX, TX / D0, D1 | ||
| 3 | SPI | MI, MO, SCK | ||
| 2 | I2C | SDA, SCL | ||
| 2 | Power | 3.3F, GND | ||
| 2 | Control | En, RST, | ||
| 3 | Other | ARef, Bat, Free |
Sources for Feather Controllers
| Vendor | Link | |
|---|---|---|
| Adafruit | Feather controllers | |
| SparkFun | SparkFun THING+ boards |
Sources for Feather Shields
| Vendor | Link | |
|---|---|---|
| Adafruit | FeatherWing boards | |
| SparkFun | SparkFun THING+ shields |
Last updated on